Dual septic system
Product Reviews Tips & Advice

What Is An Advanced Secondary Treatment System?

30 November 2021

There is a vast array of wastewater treatment systems by various manufacturers throughout Australia, making you feel overwhelmed when buying a wastewater system.

Each brand and system type are all varied to a degree, but all have the same desired outcome of treating your wastewater and returning it to the natural environment safely.

This particular article will look at the differences between Primary Wastewater and Secondary Wastewater Treatment Systems.

Primary Wastewater Treatment Systems

A “primary” system is essentially a traditional septic tank and absorption trench with no additional systems. The effluent and wastewater flows from the premises into the Septic Tank for treatment and then to the absorption trenches using gravity (a pump is used when gravity is unachievable). 

Septic tanks turn wastewater into an effluent that must be disinfected via UV exposure, sand filters, wetlands, or leached back into the ground via irrigation or sprinklers. 

The absorption trenches are underground, so the effluent doesn’t come into contact with humans and animals because the quality of the effluent is generally poor. Turf or other suitable plants are planted on top of the trenches to absorb nutrients and remove excess water through evapotranspiration. 

 

healthy septic tank

 

 

 

 

 

 

 

 

 

 

 

 

Note, Septic tanks do not kill pathogenic bacteria, viruses or parasites.

You should take extreme caution with effluent coming into contact with people, food, clothing and pets.

Septic tanks (Primary Waste Treatment Systems), absorption trenches, or leach field style systems are Australia’s most common septic systems.  Primary Waste Treatment Systems tend to be a cost-effective option with low installation and ongoing maintenance costs. 

Advanced Secondary Treatment Systems

Advanced Secondary Treatment Systems (STS) and Aerated Wastewater Treatment Systems (AWTS) treat the wastewater from your home to a much higher quality than a Primary system. 

For example, our Advanced Secondary Treatment Systems receives all wastewater from the premises, including the kitchen, toilet, shower and laundry, and quietly and efficiently recycles all the household wastewater into clean, clear and odourless water suitable for irrigation on your garden and lawns. 

double awts septic system

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How Does Advanced STS Work?

The influent enters the Primary chamber, where scum and solids are separated from the raw influent. Primary treated effluent flows through to the aeration tank. The Primary tank will also be a storage chamber for sludge returned via the Clarification Chamber.  

Once the effluent enters the Secondary chamber, air is introduced via an air blower to create an environment for aerobic bacteria and other helpful organisms to consume the organic matter present. The aeration tank (Secondary treatment tank) is designed to help prevent short-circuiting of the wastewater to ensure extended aeration. Media is also present in the tank to support the growth of bacteria.

The Clarification chamber is essentially a quiescent zone where suspended particles/solids are settled out of the water. These particles are returned to either the primary or secondary chambers via a sludge return which aids in further biological reduction, de-nitrification and providing a constant food supply rich in microbes supporting the system through periods of limited flows.

And lastly, disinfection is achieved via low doses of chlorine to kill off any remaining harmful organisms, which is performed through an automatic chlorinator.

garden master AWTSFor these reasons, Advanced STS and AWTS are fast becoming the most popular choice for residential septic systems and commercial wastewater systems used throughout Australia. Garden Master septic systems are Advanced STS and the systems we recommend.

 

If you’re unsure what septic system would suit your property, check out our article Septic Tank Buying Guide or simply get in touch for some friendly advice.

Related Articles
residential septic tank system
Tips & Advice

Septic System Maintenance Guide

21 September 2021

Your septic tank is a living ecosystem where bacteria digest waste.

Like any live system, it can become sick if flooded, poisoned with chemicals, or not looked after.

Use this septic system maintenance guide to keep your wastewater system in tip-top shape. Alternatively, if you’re after someone to service your AWTS, STS, Absorption Trench or Septic Tank we are experts at repairs and maintenance of these wastewater systems. We service Newcastle, Maitland, Hunter Valley, Central Coast and Sydney.

Ok assuming you want to do it yourself, first of all, you’ll want to ensure that your septic is healthy. Your septic may need attention if any of these conditions occur;

SEPTIC HEALTH CHECKLIST:
  • The air around it smells – usually like rotten egg gas.
  • The ground is damp or soggy, or pools form downhill.
  • There’s lots of dark green grass growing on or around the absorption area.
  • The toilet or drains are slow to clear or keep backing up.
  • Many weeds are growing downhill from the absorption area, in nearby drainage channels or on the banks of a nearby waterway.
  • The septic tank has not been checked for over 12 months.
  • The septic tank has not been pumped out (de-sludged) in the past 3-5 years (this is the most common cause of problems – get it pumped!).

If any of these factors apply, you should act quickly so that the damage and the cost of repair do not worsen.

 

The DO-IT-YOURSELF ONCE-A-YEAR 20-minute Septic Checkup

1.) Carefully open the inspection cover – you may need a heavy screwdriver – and then stand clear for a while. Keep naked flames well away. Check the fluid level near the outlet; use a torch if necessary. Fluid should be no higher than the outlet pipe at the wall of the tank (there should only be floating ‘scum’ above this level – see the septic tank diagram in our blog Septic Tank Buying Guide). Warning – Wear protective gloves and wash hands.

2.) If you have an effluent filter, check it is working. 

Action: If it’s clogged – rinse it clean with a hose, so the drainage goes back into the septic tank. If it doesn’t clean up, replace the filter cartridge. Warning – Wear protective gloves and wash hands. 

3.) If you have absorption trenches, check the area carefully. It should not be soggy, should not smell and should not have prolific grass growth. Grass should be kept well mown and clippings removed. 

Action: If it’s soggy, smells or is overgrown with dense grass, there may be too much water flowing into your septic, or the trenches may be exhausted. You should call a plumber or septic system specialist. 

4.) Check all drains and toilets in the house are working properly. 

Action: If drains and toilets are slow to empty, the pipes may be blocked, the septic system may be full, or the trenches may be clogged or exhausted. You should call a plumber or septic system specialist. 

If you are unsure, it’s best to consult a wastewater maintenance specialist.

COMMON CAUSES OF SEPTIC SYSTEM PROBLEMS

Tank too full

 

 

 

If you have a septic tank and absorption trench, the level in the tank should not be higher than the outlet. If you have a pump-out system, the tank should be no more than 2/3 full.

Solution: See next section, Pumping out.

 

Too much sludge and scum in the tank 

Septic tanks work by retaining solid scum and sludge and letting liquid effluent flow out to the trenches. The solids don’t move out of the tank. They just stay behind and build up. Suppose you don’t have the tank pumped out (de-sludged) regularly. In that case, it will eventually fail, and untreated wastewater with heavy solids contamination will flow out of the tank, clogging pipes and the absorption trenches. It would be best if you had your tank pumped every 3 to 5 years. 

Solution: See next section, De-sludging. 

 

Too much water going into the system 

This causes the effluent to flow too quickly through the tank before the bacteria have a chance to work. As a result, solids can be pushed through the system, polluting the holding tank or clogging the absorption trenches. 

Solution: Use less water. Homes on tank water are already used to conserving water, but in homes connected to reticulated water, there is much more temptation to overuse water. See How to maintain a healthy system for tips on reducing water use. 

 

 

 

 

 

 

 

 

 

Toxic chemicals going into the system 

Chemicals like solvents, oils, paints, disinfectants, pesticides, household cleaning products and bleaches can kill the helpful bacteria in your septic system. This may ‘kill’ the system and stop it from digesting effluent. 

Solution: Switch to natural cleaners if possible, and use smaller amounts. 

 

 

 

 

 

 

SHOPPING TIP – use low-phosphorus detergents 

Changing washing powders can make a difference to the amount of phosphorus entering rivers from on-site systems. Using phosphorus-free detergents can mean less phosphorus in the waterways, which means less risk of fish kills and toxic algal blooms. Septic systems don’t work well if too much phosphorus is going into the system. Always look for low-phosphorus or phosphorus-free detergents. 

IF YOU HAVE A PUMP-OUT SYSTEM

Pumping out (about every two weeks)

If your system is smelly or the toilet is backing up, this is often a sign that the tank is overdue for a pump-out. Generally speaking, the tank needs pumping if it is more than two-thirds full of liquid effluent. You can check how full it is by using a torch.

Generally, a pump-out septic system in full-time use should be:

• Pumped out every 1-2 weeks (depending on the number of people)
• Inspected every 1-2 years.

How often you pump out depends on how large the tank is and how many people use the system. Check with your council for guidelines. You can check how full the tank is by lifting the inspection port or lid on top of the tank. All pump-out systems should be fitted with a dipstick (copper pipe with a “+” on the end) in the collection well. The dipstick should be marked with a “full” level marking that says it’s ready for a pump-out.

IF YOU HAVE ABSORPTION TRENCHES

De-sludging (every 3 to 5 years)

You need to have sludge and grease removed from your septic tank regularly. Septic tanks need ‘de-sludging every 3-5 years; otherwise, these solids build up and reduce the working volume. When this happens, the wastewater has less time to settle and solids flow into the absorption trench and clog it up, drastically shortening the trench’s life and requiring costly repairs.

Newly pumped-out septic tanks should be filled with clean water and a handful of lime to reduce odours and encourage helpful bacteria. The other place to check if your septic system isn’t working correctly is around the absorption trench. The absorption trench is where the effluent flows after it leaves the tank. An archway or perforated pipe is laid in a gravel trench and covered with soil. Effluent seeps through the archway or pipe and is absorbed by the soil. Soil processes further treat the effluent, reducing pollutants and pathogens.

Don’t wait until the trench starts to fail before having your tank pumped. With septic systems, an ounce of prevention is worth a ton of cure!

Clogged trenches are a common cause of septic system problems. Trenches fail when they get blocked, and effluent is unable to evaporate or drain away.

You can tell if the trench has failed because the area will be soggy, smelly and covered with dense grass.

Absorption trenches should last for 15-25 years, but if they are not well built and maintained correctly, the trench life can be reduced to as little as two years.

How to keep your absorption trench working well

What can you do to fix a failed trench? It’s best to contact your council or consult a septic system specialist (find them in the Yellow Pages).

In the meantime, there are some simple DOs and DON’Ts to help keep your absorption trench working well.

Trench DOs

  • Do proper soil tests to determine the type of absorption system to use and how large it should be.
  • Plant small trees or shrubs down-slope and away from your trench system to help absorb effluent. Use water-loving and shallow-rooted plants, such as tropical palms, banana palms, poplars, paperbark trees and wetland plants.
  • Consider installing a dual trench system to rest trenches and soil areas alternately. They will perform better and last much longer. Dual disposal areas should be swapped over every 12 months or so.
  • Build a small earth bund wall (a small ridge) about 15 cm high that is longer than and uphill from the trench area to divert surface runoff water around it, reducing the load on your trench in wet weather.

 

This is a well-maintained absorption area.

Trench DON’Ts

  • Do not drive over or disturb the stormwater diversion contour mounds.
  • Do not build structures on the absorption trench or plant trees that will shade it. The area should be in full sun to help plant growth, evaporation and pathogen breakdown. Small trees should be planted at least 5m away, and large trees should be over 20m away; if not, the roots will harm the trench.
  • Do not flood the disposal area with sprinklers or hoses.
  • Do not drive cars on the trench area or graze animals there. Any heavy movement may break the pipework or the dome cover and will compress the soil. A small fence will let visitors know which areas to avoid.
  • Do not cover the absorption trench area with concrete, pavers, etc.
  • Do not store loads of soil or other materials on your absorption trench area.
  • Do not place extra topsoil on top of your trench to ‘soak up’ overflowing effluent. If the trench area is soggy or water is pooling over the trench, it’s best to call a plumber and have it checked.
  • Do not let children play in the absorption trench area.

 

Don’t treat your absorption area like this.

Effluent irrigation systems: Do’s

Irrigation systems are susceptible to blockage and require regular maintenance service. Ideally, small effluent irrigation systems should use fixed distribution lines buried to a depth of 100mm or more with high-quality drip emitters.

Septic specialists should be employed to design and install an effluent irrigation system. If you move into a house with an irrigation system, get expert advice on maintenance.

The plants that are being watered by your subsurface irrigation system must tolerate high amounts of water and nutrients. Seek advice from a horticulturalist or landscape gardener when choosing plants for your irrigation area. The effluent irrigation area should be clearly signposted to alert visitors that recycled effluent is being discharged. The area should be protected by a low (15cm) bund wall all around to minimise surface water run-on and run-off. Check out our article on What Plants Can You Plant Around A Septic System for more info.

 

Read the Do’s and Don’ts for absorption trench areas – most apply to irrigation.

Stay safe!

Don’t attempt to repair a septic system yourself – get an experienced septic maintenance contractor.

If you are checking your septic system, REMEMBER:

  • Sewage contains germs that can cause disease.
  • Septic tanks contain toxic and explosive gases.
  • Never enter a septic tank and avoid breathing fumes.
  • Never smoke or use naked flames near an open septic tank.
  • Be sure the area is well ventilated; allow some time for gases to clear.
  • Be sure someone is watching you and can call for assistance if necessary.
  • Switch off the power – electrical controls are a shock and spark hazard.
  • When done, secure the septic tank lid so that children cannot open it.

To help maintain the health of your septic system, it’s an excellent idea to speak with an industry professional.  

 

Garden Master has been recognised as an industry leader for over 30 years, manufacturing, supplying and servicing quality wastewater treatment systems and septic tanks for thousands of clients across Australia.

Don’t hesitate to call us on 1800 632 582 with any questions!

 

Resources:

NSW Department of Local Government. 2000. The Easy Septic Guide. Developed by Social Change Media for the New South Wales Department of Local Government.

Related Articles
Septic Tank Buying Guide
Tips & Advice

Septic Tank Buying Guide

20 May 2021

What do I need to know before buying a septic system?

Do your homework before investing.

Your first step should be to obtain some advice and investigate what option will best suit your land before you invest!  

If you’re buying land for a new home, before you buy, check into local regulations. Your local council or local land-use consultant should be able to advise you. Many councils use a three-class risk classification scheme (high risk, medium risk and low). Council should inform you what area you fall into, what kind of septic systems are allowed, and whether you must have septic tank filters or septic tank drain fields.

When planning your septic system, you will want to factor in how close your tank and irrigation area is to your neighbouring properties.

Unfortunately, these things do happen from time to time as a result of irregular servicing or faulty tanks (not ours of course!).

For basic leaks, it is actually unlikely that you will notice them as this will occur under the ground. However, blockages and other complications will have much more noticeable signs that will give you a pretty clear indication it is time to get a service, a pump-out, or even have your septic tank replaced.

You will want your septic tank system to be:

  • 15m away from the house, outdoor play areas and BBQ
  • 50m minimum away from water bore (250m away if used as a water supply)
  • 12m uphill or 6m downhill from other properties
  • 100m from streams

 

 

 

Groundwater is easily contaminated. Ensure your septic system is located at a safe distance from wells, bores, creeks, lakes and houses. 

Note: Water polluters in NSW can face hefty clean-up notices and fines. Penalties can be up to $120,000 for individuals and $250,000 for corporations for pollution offences under New South Wales law. 

 

What types of Septic Tanks and Systems are available?

Septic tanks, absorption trenches or leach field style systems are the most common type of septic system used in Australia.

Note, Septic tanks do not kill pathogenic bacteria, viruses or parasites!

Septic tanks turn wastewater into effluent that must be disinfected via UV exposure, sand filters, wetlands, or leached back into the ground via irrigation or sprinklers. You should take extreme caution with effluent coming into contact with people, food, clothing and pets.

The contents of a healthy septic tank should form 3 layers:

  • A layer of fats (called scum) floats to the surface, helping to prevent odours from escaping and stopping air from entering
  • A clear layer (called effluent), after treatment, flows out the outlet pipe as new wastewater enters.
  • A layer of solids (called sludge or bio-solids) sinks to the bottom and needs to be pumped out periodically.

 

healthy septic tank

 

When choosing a septic system, the most important thing to consider is where it will be used, how it will be used and who will use it. For example, a septic system in a weekend holiday home will get far less use than a septic system in a large, permanently occupied family home. 

The system chosen will largely depend on the suitability of your site for effluent absorption, how many people will live in the home, what area of land is available, what kind of lifestyle the family lives in, and what heavy water-use appliances are in the house. 

You should factor in soil type, salt content, local rainfall, and the water table’s depth.

 

With all that said, here are your typical options:

 

SAND FILTER SEPTIC SYSTEMS

After the wastewater is turned into effluent in your septic tank, it passes through a sand filter unit before being discharged into your absorption trench. A sand filter is usually a sealed unit about 9 meters long, often with turf growing on the top surface.

Sand filters capture suspended solids and provide an aerobic environment that encourages friendly bacteria that digest waste and reduce pollution. 

Sand filter septic system
EVAPOTRANSPIRATION BEDS

These systems are rare, used where soil conditions are less suitable for absorption trenches and where evaporation and transpiration rates normally exceed rainfall.  

After the wastewater is turned into effluent in your septic tank, it passes through perforated pipes into a line gravel bed covered with turf. The water is removed by evaporation and transpiration through the grasses.

Evapotranspiration beds
WETLAND TREATMENT SYSTEMS

Reed beds and wetland treatment systems tend to be used in larger industrial-sized sewage treatment plants and not often (if at all) in a domestic application.

Like the other methods, after the wastewater is turned into effluent in your septic tank, it flows out into a lined wetland where reed, aquatic flora, and fauna remove the nutrients before being dispersed into the absorption trenches or leach field.

wetland treatment systems
ADVANCED SECONDARY TREATMENT SYSTEMS (STS) & AERATED WASTEWATER TREATMENT SYSTEMS (AWTS)

AWTS and Advanced Secondary Treatment Systems (STS) are fast becoming the most popular choice of septic systems used throughout New South Wales, ACT and Victoria. Garden Master septic systems are Advanced Secondary Treatment Systems and are the ones we often recommend.

Our Advanced STS systems can come in a two-tank or single large tank option. Per the other systems, wastewater is collected in a holding septic tank (or section within the single tank option) where solids settle, and anaerobic digestion occurs. The effluent is then moved on to the Aeration tank or section in the single tank option. In the second aeration tank/section, oxygen is bubbled through the effluent to encourage aerobic bacteria to digest the waste. Finally, the aerated effluent is disinfected using chlorine or ultra-violet light before being pumped to an irrigation area for disbursement. 

Fixed-line drip irrigation systems are usually the preferred method of disbursement, although, in rural areas, some councils also permit the use of low-throw spray irrigation on larger properties. Aerated septic systems may also be used to treat greywater to a standard suitable for garden watering of non-food plants. 

People using aerated septic systems must enter a regular maintenance contract for quarterly servicing, which the council may supervise. 

 

AWTS

 

Our Garden Master Elite Secondary Treatment System (STS) has been designed with a large capacity in mind. This will ensure safe and reliable operation even when doing multiple wash loads or when guests stay over.  The last things you want are embarrassing odours emanating from your septic tank.

You will not have to live your life around your wastewater treatment plant. You can have peace of mind knowing that your Garden Master STS is operating quietly and efficiently.

Garden Master Elite – One tank, one hole and one connection, it couldn’t be easier:

garden master AWTS

How much does a Septic System cost?

Septic tank and septic system prices vary depending on the type of system, the size of the home and the location. The average septic tank cost for a four-bedroom home is between $10,000 and $20,000, with a one-off fee for installation plus yearly running costs with desludging every three to five years.

When getting quotes on your system, don’t forget to ask for a cost estimate for maintenance and installation. Some septic tank systems require very little maintenance beyond regular pumping. Others, like AWTS, need you to enter a standard maintenance contract for quarterly servicing, which the council may supervise. 

 

What is the process of getting a quote through to installation?

Step 1. Consultation

Before installing your septic system can begin, you will need to establish what design will suit your needs and site. A professional will need to check the soil to ensure that the area is suitable and has enough drainage. They will also check the site for the best locations for the drain field.

Step Two: System Design

Based on your site’s soil composition, location, house size and intended use, a system will be designed based on the best type of septic system for your property. This plan will include the best drain field placement and septic tank placement. While creating this plan, the engineer will meet all local standards and council requirements to ensure that the system complies with all proper standards and regulations.

Step Three: Approval

Once the design is complete, it must be approved. The local health department and authorities must inspect the plans and ensure they meet all necessary standards and regulations. They will ensure the layout has been created correctly and that drainage and wastewater treatment will not lead to groundwater contamination. Once the plan has been approved, the local health department will issue a permit to discharge, allowing the installation to begin.

Step Four: Installation

Once the system design has been approved, and the council issues an ‘approval to operate a system of sewage management’, which sets out the basic rules you need to follow to keep the system working well, your septic services company can install your system. A licensed installer will install your system. 

Step Five: Operation and Use

After your system is installed, the installer will ensure everything is working correctly. Once the system is working correctly, your installer or another member of your septic services company will explain how your system works and provide you with essential instructions on caring for your new septic system. Before leaving you with your new system, your septic services company will ensure that you fully understand it and how to use it.

 

To help choose the best septic system for your needs tailored to your site, it’s an excellent idea to speak with an industry professional.  

 

Garden Master has been an industry leader for over 30 years, manufacturing, supplying and servicing quality wastewater treatment systems and septic tanks for thousands of clients across Australia. 

Don’t hesitate to call us on 1800 632 582 with any questions!

 

Resources:

NSW Department of Local Government. 2000. The Easy Septic Guide. Developed by Social Change Media for the New South Wales Department of Local Government.

 

Related Articles
residential single tank AWTS Advanced STS Wastewater Treatment Systems
Tips & Advice

Leaking From Your Septic Tank & What To Look For

11 February 2021

Leaks from your septic tank can be hazardous, but with regular servicing, you would hope this wouldn’t occur.

Unfortunately, these things do happen from time to time as a result of irregular servicing or faulty tanks (not ours of course!).

For basic leaks, it is actually unlikely that you will notice them as they will occur under the ground. However, blockages and other complications will have much more noticeable signs that will give you a pretty clear indication it is time to get a service, a pump out, or even have your septic tank replaced.

Low Liquid Level

This is the most common indicator of a leak under the ground. It is likely that you wouldn’t notice this because you are continually adding liquid to the tank but this can be picked up when thoroughly inspecting the tank. You will be able to notice the liquid level is lower than normal, meaning it is escaping somewhere.

Liquid Flow Back or Pooling Water

If there is a blockage or your septic system is full, you may notice pooling water in the yard. When the tank reaches its capacity, solid waste can clog the pipes, which forces the liquid to the surface. This may look like you’ve had heavy rainfall and the grass is yet to absorb the water. If it does not absorb, it is likely liquid flow back.

Slow Drains

Slow-draining water that cannot be fixed using septic-safe drain cleaners or unblocking products may be the result of blocked pipes caused by a full tank. Keep an eye on your sinks, bathtub and toilet and pump out your tank if necessary.

Bad Smells

This is typically where you get a sense that something is wrong, even if you can’t see any visible signs. If there are unexplained, unpleasant smells persisting on your property, it’s worth contacting Garden Master to do a service and check for blockages.

Sewage Backup

In this situation, you would be at the critical point where it is time to call in expert help. This will happen in the lowest drains first, so if you have a basement and have noticed a bad smell, check there first. A sewage backup is messy and you should never try to clean it up yourself. Call for professional help immediately.

 

If you notice any of the above signs or simply feel as though there may be a leak or blockage, the best next step is to call Garden Master Waste Water Solutions. Septic Tank leaks can be unsafe and unsightly; it is always best to call in experts and resolve the situation as soon as possible to avoid further damage or complications.

Garden Master offers septic tank servicing and septic tank cleaning from the Hunter Valley and across the Greater NSW region as well as new septic tank and wastewater system installation throughout NSW, Victoria and ACT.  We’ve also completed commercial projects in the Arnhem Land, the Kimberleys and even Alaska in the USA!

 

For any enquiries about your existing septic system or to get a free quote on an installation, give us a call at 1800 632 582  or submit an enquiry online.

 

Related Articles
Septic Tank Cleaning Products Dos & Don'ts
Tips & Advice

Septic System Do’s & Don’ts

14 December 2020

How to Maintain Your Septic System: Dos, Don’ts & Why Chemical-Free Living Matters

Your septic system plays a vital, behind-the-scenes role in managing your household’s wastewater. Whether you’re on a rural property or in a semi-urban setting without access to a sewer system, keeping your septic tank healthy is crucial—not just for your home’s plumbing, but also for the surrounding environment.

However, many people unknowingly damage their septic systems by pouring harmful chemicals down the drain or ignoring simple maintenance routines. In this guide, we’ll explore the essential dos and don’ts for septic system care and explain why avoiding chemical cleaners is one of the smartest things you can do for your home and our planet.

Contents

  1. Understanding How Septic Systems Work

  2. Why Chemical-Free Living Supports Septic Health

  3. Septic System Dos – Best Practices to Follow

  4. Septic System Don’ts – Habits That Cause Harm

  5. Recognising Signs of Septic System Trouble

  6. Natural Alternatives for Cleaning & Maintenance

  7. How Garden Master Can Help

Understanding How Septic Systems Work

A septic system is a self-contained, on-site wastewater treatment system. It processes everything that goes down your sinks, showers, toilets, and laundry. Once waste enters the septic tank, solids settle to the bottom, oils float to the top, and liquid wastewater flows out to a drainage field where it filters through the soil.

For the system to work properly, naturally occurring bacteria are essential—they break down waste and help prevent blockages and odours. Harsh chemicals and poor household practices can kill off these bacteria, causing the system to fail over time.

Why Chemical-Free Living Supports Septic Health

Most commercial cleaning products contain harsh chemicals like bleach, ammonia, phosphates, and synthetic surfactants. These substances are toxic to the beneficial bacteria your septic system relies on.

Common Chemicals That Damage Septic Systems:
  • Chlorine – Found in numerous cleaning products, used for pools and dumped into many water supplies, studies suggest that chlorine exposure is linked with an increased risk of heart disease, allergic reactions and miscarriages, as well as increased rates of bladder, colon and rectal cancers.
  • Ammonia – Found in all-purpose cleaners, antibacterial cleaners, window cleaners and furniture polish. Ammonia can irritate eyes and lungs, cause burns or rashes, and, if mixed with chlorine products, it can cause deadly chloramine gas; exposure to which could be fatal.
  • Pesticides & Fertilisers – Many common pesticides used for gardening are known carcinogens, meaning they cause Cancer.
  • Cationic & Anionic Solutions – Found in laundry detergent and washing liquid, if accidentally ingested, they can cause nausea, vomiting, shock, convulsions or, most severely, coma.

These are some of the most common; however, this list doesn’t even scratch the surface. If you must buy consumer brand cleaning products, look for natural products and read the label to ensure ALL products are natural and not harmful to you or the environment.

Instead, choose biodegradable, septic-safe cleaning products, and minimise using all chemicals where possible.

Septic System Dos – Best Practices to Follow

To keep your system running smoothly:

✅ Use septic-safe cleaners and detergents that are free from chlorine, bleach, and phosphates.

✅ Pump your tank regularly (usually every 3–5 years, depending on household size and usage).

✅ Fix leaking taps and toilets to avoid flooding the system.

✅ Spread out laundry loads and heavy water use across the week to prevent overload.

✅ Install water-efficient appliances and fittings to reduce water entering the system.

✅ Keep trees and shrubs away from the drain field to avoid root damage.

✅ Know your system’s layout and avoid driving or building over the septic tank or drain field.

Septic System Don’ts – Habits That Cause Harm

Bad habits can cause serious (and expensive) septic system issues. Avoid the following:

❌ Flushing anything other than human waste and toilet paper. Avoid wipes, tissues, tampons, nappies, floss, and paper towels.

❌ Pouring fats, oils or grease down the sink—they solidify and clog pipes.

❌ Using the toilet or sink as a bin for food scraps, chemicals, or paint.

❌ Running multiple appliances at once (e.g., shower, washing machine, and dishwasher) which can overload the system.

❌ Neglecting inspections and maintenance, especially if you notice slow drainage or odours.

❌ Using chemical drain cleaners – opt for a plunger or plumber’s snake instead.

Recognising Signs of Septic System Trouble

Early intervention can save you thousands in repairs. Be aware of:

  • Foul odours from drains, toilets, or near the tank or drain field.

  • Slow-draining sinks, showers, or toilets—a classic sign of a clog or overload.

  • Water pooling in your yard near the drain field—this may indicate overflow or failure.

  • Lush, bright green grass over your drainage field—it may be fertilised by leaking wastewater.

  • Gurgling sounds in your pipes or sewage backups.

If you notice any of these, contact a licensed septic service technician immediately.

Natural Alternatives for Cleaning & Maintenance

Want to clean your home safely and protect your septic system? The general rule should be, if you couldn’t safely eat it, don’t put it on your skin or your atmosphere. These chemicals cause significant damage over time to your body and to the environment, and flushing them into waterways kills plant life and harms animals, as well as you.

Just about everything can be cleaned with a few simple natural ingredients—mix these together, and you have an all-purpose cleaning solution.

Here are some simple swaps:

  • Vinegar and baking soda for cleaning drains and surfaces

  • Castile soap or eco-friendly dish soap for washing

  • Lemon juice and bicarb soda for freshening the kitchen

  • Hot water and a plunger instead of chemical drain cleaners

  • Borax or washing soda in place of bleach for whitening laundry

These options are not only septic-safe, but also better for your health and the environment.

safe products to use with a septic tank

How Garden Master Can Help

At Garden Master, we’re experts in environmentally responsible wastewater solutions. Our Aerated Wastewater Treatment Systems (AWTS), Advanced Secondary Treatment Systems (STS) and Greywater Recycling Systems are designed with sustainability and efficiency in mind. We support households across NSW, Victoria, ACT, and beyond in managing their waste safely and sustainably.

We also provide:

  • Professional installation and servicing

  • Ongoing maintenance plans

  • Guidance on safe water use

  • Expert advice on reducing chemical impact

📞 Contact us on 1800 632 582 or submit a request via our online contact page for a free quote and consultation.

✅ Final Tip

Your septic system is only as good as the habits of the people using it. By being chemical-conscious and following best practices, you’ll extend the life of your system, save money, and help protect Australia’s waterways and environment.

Useful Reading: 
Un-sewered Area
Tips & Advice

Unsewered Areas, What Is The Septic Tank Alternative?

29 August 2019

Septic Tank Alternatives: Modern Wastewater Solutions for Unsewered Properties

If you’ve recently purchased a home or vacant land in an unsewered area, you’re likely exploring septic tank alternatives to manage your household wastewater. While traditional septic tanks have long been the standard, they’re no longer the only option—and in many cases, they’re not the most efficient or environmentally friendly.

Whether you’re installing a new system or reviewing the performance of an old one, it’s worth considering more advanced wastewater treatment solutions. Outdated systems can be inefficient, prone to failure, and potentially harmful to the environment. In contrast, modern systems like Aerated Wastewater Treatment Systems (AWTS) and Advanced Secondary Treatment Systems (STS) offer cleaner, safer, and more sustainable outcomes.

In this article, we’ll explore the different types of wastewater treatment systems available today, the benefits of upgrading, and why making the switch from a septic tank could be a smarter long-term decision for your property and the planet.

First, let’s consider the following.

 

What’s Wrong with Outdated Septic Systems in Unsewered Areas?

Older septic systems, like septic tanks, can be costly and pose a real threat to both water quality and the health of others. Outdated septic tanks may:

  • Be poorly built and designed

  • Have expensive pump-out services

  • Leak frequently

  • Be non-compliant with local and state Government Health regulations

 

Types of Wastewater Treatment Systems: Septic Tanks vs Alternatives

When it comes to managing household wastewater on properties without access to municipal sewerage, you have a few key options. The right system for your property depends on your location, site conditions, household size, and local council regulations.

While traditional septic tanks are still used, many homeowners are now considering septic tank alternatives like Home Sewage Treatment Plants (HSTPs) and Aerated Wastewater Treatment Systems (AWTS). These modern systems are more efficient, environmentally friendly, and often produce higher-quality treated water.

💧 What Are the Main On-Property Wastewater Treatment Options?

If your property isn’t connected to a council-managed sewerage system, your wastewater must be treated and disposed of on-site. There are two main categories of systems that can handle this:

1. Septic Systems

  • Sometimes referred to as septic tanks

  • A watertight underground container, usually made from concrete, fibreglass, or plastic

  • Collects all household wastewater, allowing solids to settle and scum to float

  • Effluent is dispersed into a drainage field or an absorption trench

  • Inexpensive and low-tech, but limited in treatment quality (only partial treatment of wastewater)

2. Home Sewage Treatment Plants (HSTPs)

  • Treat both blackwater (toilets) and greywater (sinks, showers, laundry)

  • Function like small-scale versions of municipal sewage treatment plants

  • Use multiple treatment stages to significantly reduce pollutants in wastewater

  • Treated water (effluent) can often be reused for subsurface irrigation

  • Require ongoing maintenance and electricity, but offer better environmental performance

 

🔁 Septic Tank Alternatives: Other Common Terms You Might Hear

Many systems that perform similar wastewater treatment functions go by different names. While they may vary slightly in design or performance, they all share the goal of treating and reusing water on-site.

Here are some common terms and their meanings:

  • Wastewater Treatment System
    A broad term that includes all types of on-site wastewater treatment solutions.

  • On-site Sewage Facility (OSSF or OSF)
    Any system that stores, treats, and disposes of wastewater on a property not connected to town sewer.

  • Wastewater Treatment Plant (WWTP)
    More commonly used for larger or commercial systems, but also refers to residential units that treat wastewater to a high standard.

  • Sewage Treatment Unit (STU or STP)
    A multi-stage system used to treat sewage and greywater, typically involving biological and mechanical processes.

  • Aerated Wastewater Treatment System (AWTS)
    A residential system that uses air to support aerobic bacteria, providing thorough treatment suitable for garden irrigation.

  • Aerobic Treatment Unit (ATU)
    Similar to AWTS, but often modular or designed for smaller scale use. Uses oxygen to break down waste.

  • Aerobic Septic System (ATS)
    A step up from conventional septic tanks, using aerobic processes to treat wastewater more effectively.

  • Domestic Wastewater Treatment System
    Any system designed specifically for use on a residential property to treat and manage household wastewater.

 

While the names vary, all of these systems are considered alternatives to traditional septic tanks. They provide greater flexibility, improved treatment outcomes, and better environmental protection—especially important in sensitive or high-rainfall areas.

🤔 Is a Septic Tank or HSTP Better?

Generally speaking, Home Sewage Treatment Plants (HSTPs) are considered a more advanced and environmentally friendly solution than conventional septic tanks. They treat wastewater in multiple stages—typically three—resulting in much cleaner effluent that can be safely reused for subsurface irrigation.

However, the best system for your property depends on:

  • Soil type and drainage capacity

  • Available land area

  • Proximity to waterways or neighbours

  • Local council regulations

  • Your household’s size and water usage

  • Budget and maintenance expectations

 

✅ Talk to a Wastewater Professional

Choosing the right system isn’t just about comparing septic tank alternatives. It’s about understanding your site’s specific conditions and legal requirements. A licensed wastewater system designer or environmental engineer can assess your property and recommend the most suitable solution.

At Garden Master, we design, install, and maintain a wide range of wastewater treatment systems across NSW, Victoria, and the ACT. Whether you’re upgrading an outdated septic tank or building on a new unsewered block, we can help you choose the right solution for your property.

Recommended Reading:

 

Choose the Garden Master Solution. Garden Master provides environmentally friendly solutions for both commercial and domestic properties across Australia. We believe wastewater treatment and recycling are far more efficient than relying on rainfall and play an essential role in relieving the stress put on water usage in Australia and around the world.

With more than 30 years of experience, we can provide you with the best wastewater treatment products and services. We’re available seven days a week—contact us today to find out more!

 

Related Articles

[/vc_column_text][/vc_column][/vc_row]

Posts pagination

1 2 3